Key Takeaways
- Specify performance, not a product. India’s General Financial Rules 2017 (Rule 144) ask that the description of what is procured be “objective, functional, generic and measurable” and not point to a particular trade mark, trade name or brand.
- Vagueness is the bigger everyday risk. “Medical-grade coveralls, bulk quantity” invites bids that all comply on paper and differ widely in fabric, construction and fit, which makes evaluation arbitrary and delivery disputes likely.
- Ten fields carry most of the weight. Garment type and use, fabric and GSM, construction, sizing, documentation, samples, quantity, packaging, delivery and acceptance criteria. The template below gives example wording for each.
- Handle samples carefully in public tenders. The Department of Expenditure’s Manual for Procurement of Goods discourages evaluating bids on submitted samples and prefers a displayed reference sample plus an advance sample before bulk production.
- Draft with feasibility in mind. A specification a manufacturer can price and fulfil accurately produces comparable bids. Testing a draft against real garments before publishing is cheap insurance.
A good PPE specification for a tender describes the disposable protective clothing you need in measurable terms: garment type and intended use, fabric type and GSM range, construction, sizing, the documentation each bidder must submit, quantity, packaging, delivery and the criteria the goods will be accepted against. It should be precise enough that every compliant bid describes a comparable garment, and generic enough that no single brand is written in by default.
Most tender problems in disposable protective clothing do not start at evaluation. They start when a specification is copied from the previous tender without anyone checking whether it still fits the garment, the ward or the cleanroom it is meant for. The phrase “medical-grade” then means one thing to the evaluator and something else to each bidder, and the gap surfaces months later at the receiving bay.
This guide gives you a field-by-field template you can lift into a tender document, with the reasoning behind each field. It is written for hospital purchase committees, government tender evaluators, pharma procurement teams and the QA heads who sign off their specifications. Dispowear Protection manufactures over 3 million disposable garments a month from its own GenFab® nonwoven fabric, with 20+ years of manufacturing experience across two plants in Rajasthan and Gujarat, and responds to tender specifications from the bidder’s side of the table. Some of what follows comes from that vantage point. It sits within our wider procurement playbook for bulk disposable protective clothing.
An underspecified tender does not only risk buying the wrong product. It produces a set of bids that technically comply with a loose requirement and yet describe very different garments. Once that happens, the lowest price wins by default, because there is no written basis on which to prefer a better garment.
Three gaps recur in disposable protective clothing tenders:
The pattern underneath all three is the gap between what the evaluator meant and what the document actually said. Bidders price what is written. A manufacturer cannot quote a GSM it has not been told, so it quotes the lightest one the wording allows.
The Department of Expenditure’s Manual for Procurement of Goods lists the essential technical particulars a tender document should carry where applicable: scope and end use, performance characteristics with guaranteed or acceptable values, the BIS mark where applicable, any advance sample before bulk production, packing and marking, inspection procedure and criteria of conformity, and shelf life among others. The template below applies that structure to disposable protective clothing. Copy the rows you need and replace the example wording with your own values.
| Field | What to write | Example wording | Why it matters |
|---|---|---|---|
| 1. Garment type and intended use | The garment, the area or task it is for, and the hazard it addresses | “Disposable coverall with attached hood, for Grade C/D cleanroom entry, non-sterile” | Use defines every other field. A coverall for a paint shop and one for a cleanroom are different products |
| 2. Fabric type and GSM range | Construction (spunbond, SMS, laminated) and an acceptable GSM range with tolerance | “SMS non-woven polypropylene, 40 to 45 GSM, tolerance ±5%” | The single biggest driver of barrier, breathability and price. Unstated GSM is the most common source of non-comparable bids |
| 3. Construction and seams | Seam type, closure, cuffs, hood and boot configuration | “Overlocked or bound seams; front zip with storm flap; elasticated wrists, ankles and hood” | Seams and closures are where garments fail in use, and where bids quietly differ |
| 4. Sizing range | Sizes required, size split by quantity, and a reference size chart | “Sizes M to XXXL; split per Annexure B; bidder to submit chest and height chart” | A garment that fits badly leaves gaps at wrist, ankle and neck. See our guide to specifying sizing range |
| 5. Standards and documentation | The standard or performance level the application needs, “or equivalent”, and documents each bidder must submit | “Test report against [named standard] or equivalent; COA and GSM data per lot; lot traceability” | Turns a claim into evidence. See relevant PPE standards to reference |
| 6. Samples | Reference sample on display, and/or advance sample before bulk production | “Successful bidder to submit advance sample matching the specification for approval before bulk production” | Catches specification gaps before they become delivery disputes |
| 7. Quantity and unit of measure | Total quantity, unit (pieces, not “boxes”), call-off pattern if staggered | “60,000 pieces over 12 months, in monthly call-offs of 5,000 pieces” | “Box” means different counts to different bidders. Staggered call-offs change pricing and capacity planning. Note that supplier minimum order quantities are product-specific |
| 8. Packaging and marking | Pieces per inner pack and carton, label content, lot number on each pack | “Individually packed; 25 per inner; 100 per carton; lot number, size and date of manufacture on each inner” | Packaging drives storage, issue and traceability. A lot number on the carton only is lost once cartons are opened |
| 9. Delivery schedule and locations | Delivery points, dates or lead time from purchase order, and part-delivery rules | “Delivery to three sites per Annexure C within 30 days of each call-off” | Multi-site delivery and tight windows carry cost. Bids are only comparable if every bidder priced the same logistics |
| 10. Acceptance criteria at delivery | What will be checked, sampling plan, and what happens to a non-conforming lot | “Visual, dimensional and GSM check on sample drawn per lot; non-conforming lots replaced at supplier’s cost” | Without this, there is nothing to measure a disputed batch against |
Field structure adapted from the essential technical particulars in the Department of Expenditure, Manual for Procurement of Goods. Example wording and values are illustrative, not recommendations for any specific application; set your own values from your risk assessment.
Two practical additions help evaluation. First, a schedule of guaranteed technical particulars, a simple sheet where each bidder states the offered value against each required value (offered GSM, offered seam type, and so on). Second, a requirement for a statement of deviations, so any departure from the specification is declared in the bid instead of being discovered at delivery. The Manual describes both mechanisms for complex procurements, and they translate well to protective clothing. For background on fabric weight, see specifying fabric and GSM correctly.
The goal is precise material and performance requirements, not brand-locking language. A specification that is too narrow can be challenged as restricting competition. One that is too loose produces bids that cannot be compared. The workable middle describes what the garment must do and be made of, in measurable terms, and leaves the maker open.
In Indian public procurement this is a stated principle rather than good practice alone. GFR 2017 Rule 144 asks that specifications be objective, functional, generic and measurable, avoid superfluous and non-essential features, and be based on national standards where they exist, otherwise on relevant international standards. The Manual for Procurement of Goods adds that brand names and catalogue numbers should be avoided as far as possible, and where unavoidable should be followed by “or substantially equivalent”. Tenders run on GeM, the Government e-Marketplace, operate within the same rules. Private hospitals, pharma companies and distributors are not bound by GFR, but the same logic protects them: a performance-based specification keeps more bidders in play and gives the evaluator a defensible basis for every decision.
A specification earns its keep in the middle band: specific about what the garment must do, neutral about who makes it.
A useful drafting habit: when you are tempted to write a feature only one supplier offers, write the outcome that feature delivers instead. “Thumb loops” becomes “sleeve retention that keeps the cuff in place under a glove”. “Brand X fabric” becomes “SMS polypropylene, 40 to 45 GSM, with a test report against the named standard or equivalent”.
A physical check of the garment against the written specification catches gaps before they become delivery disputes. The way to do it differs between public and private buyers.
For government tenders, the Manual for Procurement of Goods discourages calling for samples with bids and deciding on their subjective evaluation. It suggests instead that the purchaser may display a reference sample to illustrate characteristics that are hard to write down, such as shade, feel, finish and workmanship, and may require the successful bidder to submit an advance sample before bulk production. For disposable protective clothing that maps cleanly: show the reference garment, write everything measurable into the specification, and approve the advance sample before the first full delivery.
For private institutional buyers, pre-award samples are a common and practical step. Request samples against the draft specification from shortlisted bidders, check fabric, GSM, seams and sizing against the written values, and record the result. Measuring against the specification, not against personal preference, keeps the exercise fair.
Run the draft through these checks before it goes out. Each one maps to a dispute pattern that is easier to fix on paper than at the receiving bay.
Two linked resources help at this stage: forecasting consumption before you set quantities, and keeping one specification across multiple sites once the contract is live. For the supplier evaluation that follows, see questions to ask a disposable PPE manufacturer.
A manufacturer can often help a buyer test a draft specification for feasibility and pricing before the tender is published, and doing so does not have to compromise a fair tender. Asking how a GSM range affects barrier and cost, whether a seam type is commonly available, or what packaging counts are standard is market research. The line to hold is that the final specification remains generic and is published to all bidders on equal terms; in public procurement, a pre-bid conference serves the same purpose in the open.
From the bidder’s side, the specifications that price most accurately are the ones that state fabric construction and GSM range, size split, packaging and delivery pattern. Those four fields alone remove most of the guesswork that otherwise ends up as contingency in a quotation. Buyers can contact Dispowear Protection to discuss draft specifications, relevant GenFab® fabric options and product samples for evaluation, subject to product availability and order requirements.
These are the parameters a tender can fix for GenFab® garments. Each is confirmed on the product datasheet for the specific order.
| Parameter | Typical specification |
|---|---|
| Fabric | GenFab® virgin-polypropylene SBPP nonwoven, manufactured in-house; SMS and laminated constructions available |
| GSM | Selected according to application requirements and fixed on the order datasheet |
| Garment range | Coveralls, isolation gowns, lab coats, aprons, sleeve protectors, hoods, caps, beard covers, shoe and boot covers |
| Construction | Seam, closure and cuff options selected according to application requirements |
| Sizes | Full size range; size chart supplied for tender evaluation |
| Barrier performance | Selected according to application requirements; confirmed through technical documentation where applicable |
| Treatments | Lamination and anti-static treatment selected according to application requirements |
| Sterility | Gamma-sterilised and non-sterile options for applicable products; dose, packaging and documentation confirmed according to the specific product and order |
| Packaging | Inner and carton counts and labelling to tender requirement, including lot number and size |
| Documentation | COA, GSM data, fabric test reports and lot traceability supplied with each batch |
Figures are indicative and confirmed on the product datasheet for each order. Minimum order quantities are product-specific and confirmed at quotation.
At minimum: garment type and intended use, fabric construction and GSM range, seams and closures, sizing range and split, the standards and documents bidders must submit, sample requirements, quantity in pieces, packaging and labelling, delivery schedule and locations, and acceptance criteria at delivery. A schedule of guaranteed particulars and a statement of deviations make bids easier to compare.
Detailed enough that every compliant bid describes a comparable garment, and no more. Each requirement should be measurable and tied to the intended use. If any garment at all would pass, it is too loose; if no manufacturer other than one could meet it, it is too narrow. GFR 2017 also cautions against superfluous and non-essential features that add cost without need.
Bids comply with the wording but differ in fabric, construction and fit, so the evaluator has no written basis to prefer a better garment and the lowest price tends to win. The same gap reappears at delivery, when there is nothing precise to measure a disputed lot against. Fixing it on paper before publication is far cheaper than fixing it at the receiving bay.
In Indian public procurement, generally not. GFR 2017 asks that specifications not indicate a particular trade mark, trade name or brand, and the Manual for Procurement of Goods says brand references, where unavoidable, should be followed by “or substantially equivalent”. Proprietary purchase is a separate, justified route. Private buyers have more freedom, but performance-based wording still widens competition and strengthens the evaluation.
It depends on the buyer. For government tenders, the Manual for Procurement of Goods discourages evaluating bids on submitted samples and prefers a displayed reference sample plus an advance sample from the successful bidder before bulk production. Private institutional buyers commonly request pre-award samples from shortlisted bidders. Either way, judge the sample against the written specification, and rely on lot-level documentation and acceptance checks for every delivery after it.
The bottom line. A PPE specification for a tender works when it describes the garment’s use, fabric, construction, sizing, documentation, quantity, packaging, delivery and acceptance in measurable terms, and stays neutral about who makes it. Vague wording produces bids that cannot be compared and lots that cannot be judged; brand-locked wording narrows competition and invites challenge. Write the ten fields, add a schedule of guaranteed particulars and a statement of deviations, handle samples in the way your procurement rules allow, and check the draft against a real garment before it goes out. The work happens once, at drafting, and it protects every delivery that follows. For the stages before and after this one, see the full procurement playbook.
Drafting a tender for disposable protective clothing? Request sample garments and a technical specification sheet to reference while you write it, or contact Dispowear Protection to discuss a draft specification before it is published.